logo

CNC VTL 3000

Check out the Suraj CNC VTL 3000 series at Sahil Machines. It includes a strong 4 Jaw chuck, can handle loads up to 15 MT, and has a wide turning diameter of 4000mm. With its heavy-duty beam, built-in guide ways, and advanced CNC controllers from Fanuc 0i TF and Siemens 828D, you can count on precise and reliable performance in vertical turning lathe machining.

CategorySpecification
ModelCNC VTL 3000
Max. Turning Diameter (mm)4000
Max. Working Height (mm)2000/2500/3000
Max. Load (mt)15
TABLE
Diameter (mm)3000
Main Drive Motor (hp) (VFD)60
Main Drive Motor (Servo Optional) (kw)60
Speed (rpm)5-30
Chuck4 Jaw
COLUMNS
No. of Columns2
Guide WaysIntegral guide ways
Guide Ways ProtectionBellow Covers
TOP SUPPORT
Top SupportHeavy-duty beam to support columns at top
CROSS RAIL
Vertical Travel (mm)2000/2500/3000
Guide WaysIntegral guide ways / Hardened & ground Steel Guide Ways
Guide Ways Protection CoversBellow Covers
RAM
FinishDuly Ground Finish
BalancingHydraulic Counter Balanced
Horizontal Travel (mm) -240+2000
Vertical Ram Travel (mm)1100/1300/1600
Feeds (m/min)0.1-1
Rapid Traverse (m/min)2
Cross Section of Ram (mm) 240X240
Max. Cross Section of Tool (mm)40x40/50x50
AUTOMATIC TOOL CHANGER (OPT)
No. of Positions12
Max Cross section of Tool (mm)40
Max Length of Tool (mm)300
Max Weight of Tool (kg)25
GEAR BOXES
Gear BoxBonfiglioli
LUBRICATION
LubricationCentrally Controlled Lubrication with Cenlube/Lubrite Lubrication System
MATERIALS
RamEN9 Forged Steel
GearsAlloy Steel EN9/EN353
BearingsSKF/KOYO
MAIN DRIVE
Main DriveVFD With AC Motor
Power Supply3 Ph, 440 V, 50 Hz
Voltage Fluctuation Allowance±10%
Drives for Feeds and SpindlesAC Motors for Auxiliary Drives
CNC SYSTEM
CNC ControllerFanuc 0i TF / Siemens 828D Latest
All ElectricalsSiemens/ABB
MOTOR POWER
Main Motors (VFD) (hp)60
Feed Motor (Nm)36/36
Lubrication Motor (hp)0.5
Coolant Motor (hp)1
DIMENSIONS
Length (mm)6500
Width (mm)6500
Height (mm)4500

Similar Products

...